Leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm²). The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. This will equal the pounds or load per leveling foot.
J.W. Winco Leveling Foot W/Plastic Cap, 3/8-16 x 3.93" Stud, 1.57" Base Dia, 4.49"H, 1800 Lbs. Cap, 304 SS
$15.50 Original price was: $15.50.$10.85Current price is: $10.85.
- Your questions, our prompt answers.
- Unbeatable Quality, Unbeatable Value
- Quality You Can Trust
- Shop quality, shop with us.

| Stud Length | 3.94 in |
|---|---|
| Load Capacity Range | 1000 – 2500 lbs |
| Weight Capacity | 1,800 lbs |
| Thread | 3/8-16 in |
| Height | 4.49 in |
| Unit of Measurement | Inch (Imperial) |
| Base Diameter | 1.57 in |
| Type | Threaded |
| Stud | Pivots Up To 6° |
| Country of Origin | Import |
| Material | 304 Series Stainless Steel |
| Description | Leveling Foot w/ Vulcanized Rubber Underlay |
| Manufacturers Part Number | 41-40-3/8X16-100-D3-SK |
| Vulcanized Non Skid Pad | Nitrile Butadiene Rubber |
| Leveler Material | 304 Series Stainless Steel |
| Brand | J.W. Winco |
Be the first to review “J.W. Winco Leveling Foot W/Plastic Cap, 3/8-16 x 3.93" Stud, 1.57" Base Dia, 4.49"H, 1800 Lbs. Cap, 304 SS” Cancel reply
Related products
Machine Leveling Mounts
J.W. Winco Vibration Mount, 1 Tapped Hole, 1 Threaded Stud, 1.00" Dia, .75"H, 1/4-20 Thread
Machine Leveling Mounts
J.W. Winco Vibration/Shock Absorption Mount, Threaded Stud, 2.95" Dia, 25mm H, M12 x 1.75 Thread
Machine Leveling Mounts
J.W. Winco Vibration Mount, 2 Threaded Studs, 1.00" Dia, .50"H, 1/4-20 Thread
Machine Leveling Mounts
J.W. Winco Vibration Mount, 2 Tapped Holes, 1.50" Dia, 1.00"H, 5/16-18 Thread
Machine Leveling Mounts
J.W. Winco Vibration Mount, 2 Threaded Studs, 1.00" Dia, 1.00"H, 1/4-20 Thread
Machine Leveling Mounts
Leveling Foot – Threaded – 4500 Lbs. Capacity – 3.15" Base Dia. – J.W. Winco 41-80-1/2X13-100-D1-S
Mounts, Pads & Vibration Dampers
Vibrasystems Vibra Systems VSCM-040 – Plated Cup Mount 250 Max Load Lbs Plated Steel
Machine Leveling Mounts
J.W. Winco Vibration Mount, 2 Tapped Holes, 2.00" Dia, 1.63"H, 3/8-16 Thread




Reviews
There are no reviews yet.